Product ID:EPOXY RESIN, FE-0185
MSDS Date:10/27/1987
FSC:8030
NIIN:00N020825
MSDS Number: BLKNS

H B FULLER CO

1200 WOLTERS BLVD
VADNAIS HEIGHTS, MN 55110
US

Emergency Phone: 612-481-3300

Info Phone: 612-481-3300

Preparer: JOHN R DOLMAR

Cage: 0HD19

H B FULLER CO

VADNAIS HEIGHTS, MN 55110 US

Telephone: 612-481-3300

Cage: 0HD19

EPOXY RESIN

Fraction By Weight: >10%

DIURON (SARA III)

CAS: 330-54-1

RTECS: YS8925000

Fraction By Weight: 1-10%

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3; 9192

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:DIRECT CONTACT W/THE PRODUCT MAY
CAUSE IRRITATION. SKIN:PROLONGED OR REPEATED CONTACT MAY CAUSE
MODERATE IRRITATION. EPOXY RESINS ARE POTENTIAL DERMAL SENSITIZERS.
INHAL:INHALATION IS NOT A ROUTE OF EXPOSURE. CHRONIC:VINYL
CHLORIDE IS A KNOWN HUMAN CARCINOGEN. OVEREXPOSURE MAY CREATE
CANCER RISK.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
ILLNESSES.

First Aid:EYE:FLUSH IMMED W/WATER FOR AT LEAST 15 MINS. CONSULT MD IF
IRRIT PERSISTS. SKIN:WASH AFFECTED AREA W/SOAP & WATER. LAUNDER
CONTAMD CLTHG BEFORE REUSE. INHAL:REMOVE TO FRESH AIR. SUPPORT
BRTHG (GIVE O 2/ARTF RESP) . INGEST:CALL MD IMMED .

Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:IF EXPOSED TO FIRE CONDITIONS THE PRODUCT
WILL SELF-POLYMERIZE. IT WILL BECOME EXOTHERMIC, GIVING OFF SMOKE &
FUMES CONTRIBUTING TO THE SEVERITY OF THE FIRE.

Spill Release Procedures:WEAR RUBBER GLOVES & WIPE UP W/ABSORBENT
MATERIAL. RESIDUE MAY BE REMOVED W/A CHLORINATED SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION. PRODUCT
SHOULD BE STORED AT TEMPERATURES BELOW 40F. AVOID SKIN CONTACT
W/PRODUCT AT ALL TIMES.
Other Precautions:POTNTL DERMAL SENSIT. PROD MAY REACT VIOLENTLY IF
EXPOSED TO TEMP IN EXCESS OF 120F. THE PROD CONTAINS POLYVINYL
CHLORIDE. IF A CURE TEMP = OR >150 F IS USED, ALL PARTS OF OSHA
REG, 1910.1017, VINYL C HLORIDE MUST BE COMPLIED WITH.

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PREVENT CONTACT BY USING APPROPRIATE
PROTECTIVE CLOTHING.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
WASTE DISP METH:REQUIREMENTS APPLY. DISPOSE OF I/A/W FEDERAL, STATE &
LOCAL REGULATIONS .

HCC:R1
Appearance and Odor:LIQUID.

Stability Indicator/Materials to Avoid:YES
NOT ESTABLISHED.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MAY YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS, CARBON MONOXIDE, HCL, PHOSGENE &
NITROGEN COMPOUNDS.
Conditions to Avoid Polymerization:MAY REACT VIOLENTLY IF EXPOSED TO
TEMPERATURES IN EXCESS OF 120F DURING SHIPMENT OR STORAGE.

Waste Disposal Methods:THE PROD MEETS THE DEFINITION OF HAZ WASTE UNDER
THE U.S. EPA HAZ WASTE REGS 40CFR261. IT IS HAZ WASTE CLASS
D003-REACTIVE. DISP VIA INCIN IS RECOM. CONSULT YOUR STATE OR LOC
AUTH FOR PROPER DISP IN T HE EVENT MORE RESTRICTIVE (SEE SUPP DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.